menu

Category

Products

Search

search

shopping_cartShopping cart0Device technology0Device options0Software0External sensors0Test trailer0Pumps & Compressors0Gas flares0Gas venting pipes0Disinfection0 expand_more Connection accessoriesProbes0Test head0Adapter test head0Pressure gauge0GPR testing tools0Regulator interrupter0Adapter empty tubes0Adapter0Pressure reducer0Connecting hose0Test plug0Meter connection0Connection sets0 chevron_right Test accessories chevron_right Charging technology chevron_right Transport & Storage chevron_right AccessoriesOperating instructions0

Carbon probe systemcheck_box_outline_blankYescheck_box_outline_blankNo

Multi-probe systemcheck_box_outline_blankYescheck_box_outline_blankNo

Vacuum probe systemcheck_box_outline_blankYescheck_box_outline_blankNo

Telescopic extensioncheck_box_outline_blankYescheck_box_outline_blankNo

entries per page

20

1 – 20 / 54

Suction System GasCar Laser HUNTER

new

Suction system for fixed integration into the front apron of the vehicle. The required bell probes or hose probes can be easily mounted via quick-release couplings and must be ordered separately. Depending on the vehicle, additional accessories (small parts, etc.) may be required to install the system and will be charged separately. Likewise, the installation will be charged additionally according to the time required.

E-Scooter Laser HUNTER

new

E-Scooter Ninebot MAX G30D II with mounted carpet probe for professional gas leak detection Filter and hose for connection to measuring device Laser HUNTER are included. The use of the scooter in German road traffic is subject to compulsory insurance! The corresponding registration of the scooter is not part of the scope of delivery, but is the responsibility of the customer (and the rules and regulations of the country you reside in). The Laser HUNTER is not part of the scope of delivery either and must be ordered separately.

GasCar Laser HUNTER standard

new

Pump unit for use with a Laser HUNTER. Possibility to clean the suction system by backwashing using an integrated compressor. Additional components are required for a functional system for vehicle-based pipeline inspection and must be ordered separately: – Laser HUNTER (item 251220). – Intake unit & probes – Accessories, e.g. hoses – Test system – Notebook, notebook holder – GIS software (Esders PI NOTE) – GPS Receiver

GasCar Laser HUNTER plus

new

Pump unit for use with two Laser HUNTERs for separate intake and analysis of the gas flow via the left and right side of the vehicle. Possibility to clean the suction system by backwashing using an integrated compressor. Additional components are required for a functioning system for vehicle-based pipe network inspection and must be ordered separately: – 2x Laser HUNTER (item 251220). – intake unit & probes – accessories, e.g. hoses – test system – notebook, notebook holder & software – GIS software (Esders Pi NOTE) – GPS receiver

Carbon probe set T-handle

T-bone handle screwable pinhole and bell probe combination

Flexible quick connection probe V3 with filter head

– goose neck length 255 mm – can be connected to the gas inlet of the measurement device via quick coupling

Carpet probe TS14 with joint

with flexible joint unit Carpet probe with optimised suction area, highly flexible hose with coupling and telescopic handle. The warranty of the carpet mat is 3 years.

Quick connection probe V4 with filter head & anti-torque mechanism

– integrated dust filter – goose neck length 255 mm – can be connected to the gas inlet of the measurement device via quick coupling – holding clamp at the bottom side to prevent unintended twisting Directly compatible with the OLLI or with other measuring devices via the handle of the space probe V4.

Air concentration probe V3 with flexible quick connection

probe V3 overall length: 1,75 meters

Carbon bell probe T-bone handle

Carbon bell probe T-bone handle For surface measurement in a rough terrain.

Telescopic extension

Length: 1,2 meter Overall length incl. hose: 2 meters

Industrial probe set

Industrial probe set including carrying system included: – 1x 1 m carbon extension with foam handle – 3x 1 m carbon extensions – ring probe DN 50 – ring probe DN 80 – ring probe DN 100 – ring probe DN 150 – connecting hose for carbon probes, 1 m – carrying system for industrial probe set – carrying system for 4 ring probes

Handpiece VSS 15

Handpiece VSS 15

Carpet probe TS14 without joint

without flexible joint unit Carpet probe with optimised suction area, highly flexible hose with coupling and telescopic handle. The warranty of the carpet mat is 3 years.

Vakumobil measuring adapter

Vakumobil measuring adapter with bayonet coupling For quick cleaning, the head piece can be removed without tools.

Pinhole probe VSS 15

Floating probe for GOLIATH with 3 m probe hose and water barrier

Floating probe for GOLIATH with 3 m probe hose and water barrier

Bell probe VSS 15

with 10 mm seal

Multiprobe set

Multiprobe set – telescopic handle multiprobe with connecting hose – screwable pinhole probe, for measuring of high concentrations in pinholes – screwable bell probe for measuring on wayless surfaces – screwable ambient air probe und 3 replacement tips

Carbon probe without bell & tip

Carbon probe without bell & tip with carbon probe hose connection 1m carbon probe with t-bone handle witout pin pointing cone or bell

entries per page

20

1 – 20 / 54