Products
Pressure measurement
Gas leak detection
Personal protection
Water leak detection
Line and cap detection
LTE Module
Bluetooth
Explosion protection
Infrared
entries per page
1 – 20 / 100
Laser HUNTER Gas detection & Gas measurement device
new
Highly sensitive and selective gas detection & gas measurement device with
laser technology for the inspection of underground gas pipes using suitable
probes (e. g. carpet probe). The device can also be used for the vehicle-based
pipeline inspection.
With built-in diaphragm pump, Bluetooth module and rechargeable
Li-Ion battery.
Two different laser modules can be assembled:
– single laser module for methane or
– dual laser module for methane & ethane
Moreover, the device can be equipped with additional sensors
to enable further applications.
The following applications are possible:
– Inspection of underground pipes
– Inspection of accessible pipes in buildings
– Inspection of accessible pipes on plants, etc.
– Inspection of ground soil for pinpointing (optional)
– Purging of gas pipelines (optional)
– Gas analysis (with dual laser module)
Operating time up to 10 hours
Measurement range depending on built-in sensors
Dimensions (LxWxH): 143 x 240 x 85 mm
Weight: 2.1 kg
Temperature range: 0°C bis 40°C
HUNTER Gas detection & gas measurement device
new
Gas detection & gas measurement device for the inspection
of underground gas pipes using suitable probes (e. g. carpet probe).
With built-in diaphragm pump, Bluetooth module and rechargeable
Li-Ion battery.
The device can be equipped with additional sensors to enable
further applications.
The following applications are possible:
– Inspection of underground pipes
– Inspection of accessible pipes in buildings
– Inspection of accessible pipes on plants, etc.
– Inspection of ground soil for pinpointing (optional)
– Purging of gas pipes (optional)
Operating approx. 10 hours
Measurement ranges depending on built-in sensors
Dimensions (LxWxH): 100 x 195 x 86 mm
Weight: 1.1 kg
Temperature range: -10°C to 50°C
GasTest delta3
GasTest delta3 Measurement instrument for indoor gas installation
Pressure and leak measurement instrument in accordance
with DVGW G 600, G 5952.
Operating time varies depending on the way of usage and power consumption
(e.g. serviceability in accordance with G 5952 approx. 50 tests)
Serviceability test (measurement range 0 – 10 l/h)
Gastightness test (measurement range 0 – 300 hPa)
Load test (measurement range 0 – 1000 hPa)
Serviceability test in accordance with G 5952 and with Esders express procedure
Automatic and manual test on regulators (optional)
Test on service lines in accordance with DVGW G 459-1
using G 469 B3 procedure (optional)
– Automatic regulator test including storage of outlet pressure
(flowing gas and standing gas), SSV overpressure cut-off and gastight closure
– Manual regulator test including storage of outlet pressure
(flowing gas and standing gas), SRV threshold pressure and gastight closure,
SSV overpressure and underpressure cut-off and gastight closure
– Gas detection via external, digital handheld sensor possible
– Pressure test up to 25 bar via external sensors possible
– Data storage, infrared and bluetooth interface
– Display with touch function to enter address data, project number,
meter and/or regulator number, etc.
Dimensions: 192 x 100 x 87 mm
Weight: approx. 1160 g
smart memo
Electronic pressure test case for pressure tests
with connection possibility of up to 5 external pressure or temperature sensors.
– the test procedures are menu-guided and can be carried out with
simple Data entry dialog
– a freely programmable pressure test is included
– optional test sequences for gas and water tightness tests
e.g. according to DVGW, ÖVGW, EWE, Avacon, WEVG.
– a subsequent addition of test sequences is possible easily
– large, illuminated display, even in direct sunlight easy to read
– Data entry and signature via touch display and foil keys
– Stylus for the touch display included
– Data memory for hundreds of measurements, depending on
test sequence
– Communication via Bluetooth for update, data transmission, printer
– LTE / GPS module (optional)
– robust case (IP 67)
– Operating time approx. 200 hours, extension with power supply
possible from outside
Dimensions: 220 x 90 x 168 mm
Weight: approx. 1450 g
OLLI with certified measuring function
OLLI gas measurement & warning instrument
Explosion-proof & compact handheld gas measurement instrument
as diffusion device. It can be used for up to 5 combustible and toxic
gases as well as oxygen and comes in an extremely rugged
2C synthetic housing with a Li-Ion rechargeable battery.
Up to 3 gas sensors can be installed (Ex/Ox/Tox). Assembly is based
on customer requirements. Moreover, a pressure sensor can be
installed. The instrument can be equipped with an optional pump.
Operating time > 50 hours (depending on type & number of installed
sensors and ambient conditions, w/o illumination)
Measurement ranges are subject to sensor assembly
Dimensions: 136 x 78 x 43 mm
Weight: approx. 350 g
Explosion-proof measurement instrument (active & passive):
Marking: II 2G Ex ib db IIB T4 Gb
Certificates:
BVS 17 ATEX E 043 X
TÜV 21 ATEX 8596 X
TÜV 21 PTG 7001 X
968/FSP 1940.05/21
Temperature range: -20°C <= Ta <= +50°C
SAFE EthaneTest
SAFE EthaneTest
Analyser for easy differentiation between natural gas and biogas
– rugged complete system in a service box
– including test probe and test probe hose
– fully automatic sampling and analysis within five minutes
– documentation with the built-in printer
– data memory and infrared interface to transfer all measurements
to the PC
technical data:
– display: LCD graphic display 128 x 64 pixels, illuminable
– power supply: lead accumulator, integrated charging system with 12 V input
– operating time: depending on outside temperature, over 50 analyses
– analysise range: depending on the ethane concentration in natural gas
from approx. 1000 ppm to 100 Vol. % natural gas
– operating temperature: -10°C to +45°C
– dimensions: 350 x 300 x 150 mm
– weight: approx. 5600 g
VibraGAS LS HMG2 – battery
VibraGAS LS HMG2 – battery Gas leak detector with long swan neck
Small, rugged aluminium handheld gas leak detector with
remote sensor on the swan neck and lighted display.
Display of gas traces by audible, visual and vibrating alarm.
Measurement range: 0 to 10.000 ppm methane
Operating time: > 20 hours without backlight and 20°C
Dimensions: 149 x 58 x 34 mm (plus 250 mm goose neck)
Weight: approx. 410 g
GOLIATH RN with Ethane analysis
GOLIATH RN with Ethane analysis methane and toxic gases
Detect – Measure – Analyse
Rugged, explosion proofed measurement instrument
with internal membranpump and reachargeable NiMH-battery.
operating time: depending on application and backlight
Application in accordance with DVGW G 465-4:
– Enclosed space testing – Above ground inspection
– Building inspection – Bar hole testing
– Purging gas purity – Ethane analysis
measurement ranges:
– methane ppm, Vol.%
– carbon dioxide 0 – 5 Vol.% / 0 – 100 Vol.% CO2
– oxygen 0 – 25 Vol.% O2 (optional)
– carbon monoxide 0 – 500 ppm CO (optional)
dimensions: 200 x 100 x 87 mm
weight: approx. 1250 g
explosion proofed instrument:
sign: II 2G Ex ib d IIB T3/T4 Gb
BVS 09 ATEX E 079 X
temperature range: -10°C <= Ta <= +40°C
GOLIATH Allround with Ethane analysis
methane and toxic gases
Detect – Warn – Measure – Analyse
Rugged, explosion proofed measurement instrument
with internal membranpump and reachargeable NiMH-battery.
operating time: depending on application and backlight
Application in accordance with DVGW G 465-4:
– Enclosed space testing – Above ground inspection
– Confined space entry – Building inspection
– Bar hole testing – Purging gas purity
– Ethane analysis
measurement ranges:
– methane ppm, LEL, Vol.%
– carbon dioxide 0 – 5 Vol.% / 0 – 100 Vol.% CO2
– oxygen 0 – 25 Vol.% O2 (optional)
– carbon monoxide 0 – 500 ppm CO (optional)
– hydrogen sulphide 0 – 100 ppm H2S (optional)
– pressure measurement 0 – 2.000 hPa (optional)
dimensions: 200 x 100 x 87 mm
weight: approx. 1250 g
explosion proofed instrument:
sign: II 2G Ex ib d IIB T3/T4 Gb
BVS 09 ATEX E 079 X
temperature range: -10°C <= Ta <= +40°C
GOLIATH Allround without Ethane analysis
methane/propane and toxic gases
Detect – Warn – Measure
Rugged, explosion proofed measurement instrument
with internal membranpump and reachargeable NiMH-battery.
operating time: depending on application and backlight
Application in accordance with DVGW G 465-4:
– Enclosed space testing – Above ground inspection
– Confined space entry – Building inspection
– Bar hole testing – Purging gas purity
measurement ranges:
– methane ppm, LEL, Vol.%
– carbon dioxide 0 – 5 Vol.% / 0 – 100 Vol.% CO2
– propane ppm, LEL, Vol.% (optional)
– oxygen 0 – 25 Vol.% O2 (optional)
– carbon monoxide 0 – 500 ppm CO (optional)
– hydrogen sulphide 0 – 100 ppm H2S (optional)
– pressure measurement 0 – 2.000 hPa (optional)
– flow speed measurement (optional)
dimensions: 200 x 100 x 87 mm
weight: approx. 1250 g
explosion proofed instrument:
sign: II 2G Ex ib d IIB T3/T4 Gb
BVS 09 ATEX E 079 X
temperature range: -10°C <= Ta <= +40°C
HUNTER – gas leak detector
HUNTER – gas leak detector
High sensitive professional gas detection instrument
for pipeline inspection and leak detection.
Selected sensors with humidity compensation and high sensitivity for methane.
Integrated powerful pump, rechargeable NiMH battery pack and
Bluetooth module for online data transfer to tablet computer.
Operating time:
> 10 hours including Bluetooth-data transfer
> 11 hours without Bluetooth-data transfer
Measurement range: 0 – 22.000 ppm methane
Dimensions: 200 x 100 x 87 mm
Weight: approx. 1100 g
Temperature range: -10°C to +50°C
ELLI Esders Laser Leak Indicator Set
ELLI Esders Laser Leak Indicator Set
ELLI is an innovative, portable laser methane (CH4)
measuring instrument that can be easily monitor
difficult or impossible to reach areas and hazardous
areas from a distance.
Technical data:
Calibration gas: methane (CH4)
Display: color LCD touch screen
Scanning range: 30 m standard, 50 m under good reflection conditions
Reaction time: 0.1 seconds
Detection method: tuneable diode laser absorption spectroscopy (TDLAS)
Weight: approx. 1,6 kg
Dimensions: approx. 237 x 167 x 74 mm
Measuring range: 0 … 50.000 ppm x m
Temperature range: -17°C to 50°C
Humidity: 5 to 90% rel. humidity
Protection class: IP54
Operating time: 8 hours per charge (6 hours charging time)
Power supply: rechargeable Li-ion battery
Connections: USB, earphone, GPS, bluetooth
Scope of delivery: earphones, carrying belt, rugged carrying case,
charger
SIGI EX HMG2 – rechargeable battery
SIGI EX HMG2 – rechargeable battery Gas measuring and Gas leak detector
Small, rugged aluminium handheld measurement instrument
with internal membranpump and reachargeable NiMH-battery.
operating time > 10 hours without backlight
Measurement ranges:
ppm 0 to 10.000 ppm methane
% LEL 0 to 50 % LEL methane
Vol.% 0 to 100 Vol.% methane
Dimensions: 190 x 58 x 34 mm
Weight: approx. 475 g
Explosion proofed instrument:
Sign: II 2G Ex ib d IIB T3 Gb
BVS 05 ATEX E 010 X
Temperature range: -20°C <= Ta <= +50°C
GOLIATH RN without Ethane analysis
GOLIATH RN without Ethane analysis
methane/propane and toxic gases
Detect – Measure
Rugged, explosion proofed measurement instrument
with internal membranpump and reachargeable NiMH-battery.
operating time: depending on application and backlight
Application in accordance with DVGW G 465-4:
– Enclosed space testing – Above ground inspection
– Building inspection – Bar hole testing
– Purging gas purity
measurement ranges:
– methane ppm, Vol.%
– carbon dioxide 0 – 5 Vol.% / 0 – 100 Vol.% CO2
– propane ppm, Vol.% (optional)
– oxygen 0 – 25 Vol.% O2 (optional)
– carbon monoxide 0 – 500 ppm CO (optional)
– flow speed measurement (optional)
dimensions: 200 x 100 x 87 mm
weight: approx. 1250 g
explosion proofed instrument:
sign: II 2G Ex ib d IIB T3/T4 Gb
BVS 09 ATEX E 079 X
temperature range: -10°C <= Ta <= +40°C
Druktest max
Druktest max test case for tightness measurements with internal pressure sensor
with an accuracy of 0.2 %, resolution up to 0.1 mbar, measuring range up to 1.6 bar.
– menu-guided test procedures:
– G-07 and G-12 VIAG Netherlands included
– G-22 VIAG Netherlands to MOP 100 mbar (optional)
– G-12 service line connection Stedin (Company Guidelines, Netherlands)
– Pressure test free (optional)
– large, illuminated display, easy to read even in direct sunlight
– data input and signature via touch display
– internal pump and pressure release valve for automatic test pressure generation
– data memory for hundreds of measurements, depending on test procedure
– communication via Bluetooth
– LTE / GPS module (optional)
– robust case (IP 67)
– operating time several days, depending on test procedure
– dimensions: approx. 263 x 205 x 110 mm, weight: approx. 2300 g
Thermal printer IR 58 mm P3 without power supply
Thermal printer with infrared and bluetooth interface.
– paper width: 58 mm
– powered by rechargeable battery
The power supply 230 V (item number: 202002) can be used
for charging the thermal printer.
OLLI
OLLI gas measurement & warning instrument
Explosion-proof & compact handheld gas measurement instrument
as diffusion device. It can be used for up to 5 combustible and toxic
gases as well as oxygen and comes in an extremely rugged
2C synthetic housing with 3 alkaline manganese primary cells.
Up to 3 gas sensors can be installed (Ex/Ox/Tox). Assembly is based
on customer requirements. Moreover, a pressure sensor can be
installed. The instrument can be equipped with an optional secondary
cell and/or optional pump.
Operating time > 20 hours (depending on type & number of installed
sensors and ambient conditions, w/o illumination)
Measurement ranges are subject to sensor assembly
Dimensions: 136 x 78 x 43 mm
Weight: approx. 350 g
Explosion-proof measurement instrument, marking:
II 2G Ex ib db IIB T4 Gb
BVS 17 ATEX E 043 X
Temperature range: -20°C <= Ta <= +50°C
Phocus3m Noise Logger
for installation in faucet caps.
The ready-to-use system contains a
SIM card (3G) and transmits with the screwed-on
stub antenna.
VibraGAS EX HMG2 – rechargeable battery
VibraGAS EX HMG2 – rechargeable battery
Gas leak detector
Small, rugged aluminium handheld gas leak detector with
remote sensor on the swan neck and lighted display.
Display of gas traces by audible, visual and vibrating alarm.
measurement ranges: 0 to 10.000 ppm methane
operating time: > 12 hours without backlight and 20°C
dimensions: 149 x 58 x 34 mm (plus 172 mm goose neck)
weight: approx. 450 g
explosion-proof instrument:
sign: II 2G Ex ib d IIB T3 Gb
BVS 05 ATEX E 010 X
temperature range: -20°C < Ta < +50°C
HUNTER H2
Gas detection device for easily locating even the
smallest leaks in water and heating systems
– special, highly sensitive hydrogen sensor with a resolution of 0,1 ppm H2
– extremely fast reaction to the smallest traces of hydrogen
– second sensor for pinpoint localisation in probe holes
– integrated pump with high power for flow and for negative pressure
Operation time:
> 10 hours without lighting
Measuring ranges:
0 to 1000 ppm H2
0 to 5 Vol.% H2 in N2
dimensions: 200 x 100 x 87 mm
weight: approx. 1100 g
temperature range: -10°C to +50°C
entries per page
1 – 20 / 100