menu

Category

Products

Search

search

shopping_cartShopping cart0Device technology0Device options0Software0External sensors0Test trailer0Pumps & Compressors0Gas flares0Gas venting pipes0Disinfection0 chevron_right Connection accessories chevron_right Test accessories chevron_right Charging technology chevron_right Transport & Storage chevron_right AccessoriesOperating instructions0

Test accessories

entries per page

20

1 - 20 / 40

Test set PED Basic 35 l/h

Regulation unit for direct connection to test gas cans.

Test gas 4-Gas Mix - Solo 12

Test gas in single-use gas can "Solo" with 2.2 vol% mehtane (CH4) 150 ppm carbon monoxide (CO) 2.5 vol% carbon dioxide (CO2) 15 vol% oxygen in nitrogen (N2). 1.0 litre cylinder size at approx. 12 bar Volume: 12 litres

Test gas methane 1000 ppm - Solo 12

Test gas in single-use gas can "Solo" with 1000 ppm methane (CH4) in synthetic air. 1.0 litre bottle size at approx. 12 bar. Volume: 12 litres

Test gas methane 2.2 vol% - Solo 12

Test gas in single-use gas can "Solo" with 2.2 vol% methane (CH4) in synthetic air. 1.0 litre bottle size at approx. 12 bar. Volume: 12 litres

EPS AutoCal GAS computer-controlled test equipment

- Control and regulation up to 11 test gases - Pump control via flow and pressure measurement - Prepared for optional extension - Controll and adjustment of leakage measuring devices (0 - 10 l/h) - Controll and adjustment of pressure measurement devices (0 - 2000 mbar) - Controll and adjustment of pressure measurement devices (0 - 25 bar)

Test gas methane 10 ppm - Solo 12

Test gas in single-use gas can "Solo" with 10 ppm methane (CH4) in synthetic air. 1.0 litre bottle size at approx. 12 bar. Volume: 12 litres

Test gas 5-Gas Mix - Solo 32

Test gas in small single-use gas bottle with 2.2 vol% mehtane (CH4) 25 ppm hydrogen sulphide (H2S) 150 ppm carbon monoxide (CO) 2.5 vol% carbon dioxide (CO2) 15 vol% oxygen in nitrogen (N2). 0.9 litre cylinder size at 35 bar Capacity: approx. 31.5 litres

Test equipment PED 5 components gas

-for test gas can 0.9 L and 1.65 L 35 bar- Extraction regulator for direct connection to test gas cans. Gas flow: 30 l/h Attention: coupling with free passage

Test gas methane 100 vol% - Solo 12

Test gas in single-use gas can "Solo" with 100 vol% methane (CH4). 1.0 litre bottle size at approx. 12 bar. Volume: 12 litres

Testset PED

Testset PED for use in combination with test gas can Flow rate measurement via float 10 to 100 l / h Flow rate at test gas opening adjustable via needle valve

Test device PED 10 ppm for GOLIATH/HUNTER

-with connection hose & test disc- Extraction regulator for direct connection to pressurised gas cans. Pressure and flow limitation for targeted test gas supply. Gas flow: 70 l/h

EPS AutoCal DRUCK 0-2bar computer-controlled test device

EPS AutoCal DRUCK 0-2bar computer-controlled test device - Control and regulation from 11 test gases - Pump test with flow- and pressure measurement - Prepared for optional extension - Controll and adjustment of pressure measurement devices (0 - 25 bar)

Test gas adapter HMG for flexible quick connection probe V3 With integrated humidity filter.

integrated natrasorb filter

Test gas propane 0.85 vol% - Solo 12

Test gas in single-use gas can "Solo" with 0.85 vol% propane (C3H8) in synthetic air. 1.0 litre cylinder size at approx. 12 bar. Volume: 12 litres

Test gas 2-Gas Mix - Solo 12

Test gas in single-use gas can "Solo" with 52 vol% mehtane (CH4) 48 vol% carbon dioxide (CO2). 1.0 litre bottle size at approx. 12 bar. Volume: 12 litres

Test gas methane 1.0 vol% - Solo 12

Test gas in single-use gas can "Solo" with 1.0 vol% methane (CH4) in synthetic air. 1.0 litre bottle size at approx. 12 bar. Volume: 12 litres

Standard test equipment for 5 gases

Standard test equipment for gases 5 3 connections can be freely assigned 1 connection for natural gas 1 connection for 10 ppm CH4 1 connection for fresh air through an activated carbon filter and integrated electric pump, this fresh air is used for zero stabilization of the semiconductor sensor (10 ppm test). Pump and internal electronics are powered with 12 VDC optionally via car or power supply. Delivery includes power supply and fresh air hose.

Calibration glass for ELLI (Esders Laser Leak Indicator)

- includes testgas for a smooth calibration

Holder for test gas cylinders

The holder can take up to three test gas cylinders of different sizes. The cylinders are fixed with an elastic band and two band holders and can be easily exchanged.

Test wall with bottle holder for

Test wall with bottle holder for 2 x 10 liter test gas Test wall made of stainless steel for wall mounting, with bottle holder for 2 pcs 10 liter high-pressure test gas. The package includes 2 lashings. Storage shelf for measuring device, and fixing holes for test equipment .

entries per page

20

1 - 20 / 40