smart AutoCal - 338000

Variant:

Smart AutoCal is an automatic test station for the OLLI gas detector. It supports calibration and adjustment as prescribed by DVGW G 465, as well as bump tests and pump function tests. The OLLI is connected to the test station via a hose, and the test sequence then runs automatically. The Smart AutoCal works with three permanently connected test gases and clearly identifies the connected device via its serial number. Once the test is complete, a digital test report is automatically generated and uploaded to the cloud via LTE. This means that it is always possible to trace which device has been tested and what condition it is in. The Smart AutoCal can be used flexibly in workshops, offices or vehicles.

Select the required device options for your device here.

Description

The smart AutoCal is an automatic testing and calibration station for gas detection and measurement devices. It supports network operators, municipal utilities and service providers in carrying out standard-compliant calibration, adjustment and functional testing in accordance with DVGW G 465.

Instead of manual individual tests, the smart AutoCal enables a standardised and reproducible testing process with clear device allocation, including digital documentation.

Thanks to the automated process, not only is the testing workload significantly reduced, but process reliability is also increased. This means users always have a clear overview of the device’s status, regardless of whether the station is being used in the workshop, in the office or in a vehicle.

Features & Benefits of the smart AutoCal

Compliance with DVGW G 465 requirements
Automatic calibration, adjustment or bump test
Integrated pump function test
Connection of up to three test gases possible (CH4 Ecomini & Gasmix)
Unique device identification via serial number
Consistent, standardised test procedure
Automatic digital test reports
Reports always to hand thanks to upload to the Esders Cloud via LTE
Flexible deployment (workshop, office, vehicle)

Automatic calibration and reliable documentation with the smart AutoCal

Calibration and adjustment – or, depending on the application, a daily bump test of gas detectors – are mandatory requirements. In practice, however, these are often carried out manually and documented in varying ways. The smart AutoCal establishes a uniform digital standard in this regard.

As an automatic test station for our explosion-proof OLLI, the smart AutoCal carries out calibrations, adjustments and bump tests fully automatically. In addition, the pump function of the connected device is checked during the test process. The OLLI is simply connected to the smart AutoCal via a hose. The entire remainder of the test procedure is automated.

The smart AutoCal operates with three permanently integrated test gases:

1,000 ppm CH₄ (Ecomini)
5-component / 4-component gas mix (Ecomini)
100 vol.% CH₄ (Ecomini)

During the test, the connected device is uniquely identified by its serial number. Calibration, adjustment and bump testing are carried out according to a predefined sequence. Upon completion, the digital test report is automatically generated and uploaded to the Esders Cloud via LTE. This makes it possible to track at any time which device was tested, when it was tested and what its current status is.

Technical Specifications

Dimensions	18.5 cm x 19.5 cm x 7.5 cm
Weight	Approx. 920 g
Display	240 × 160 pixels, with touchscreen and backlight
Power supply	12V DC (mains adaptor or car adaptor)
Number of simultaneous test gas connections	3
Operating conditions	Temperature: +10°C to +40°C Humidity: 0–95% RH (non-condensing) Ambient pressure: 800–1100 hPa
Storage temperature	-20°C to +60°C
Wireless data transmission	Interface for measurement data transfer, printer connection and updates
LTE	Email, automatic updates and report uploads