Adapter

 entries per page 
20
 1 - 20 / 201 
Control panel for Mobile Gas Flare M
new
Connection adapter 1 inch external thread, including pressure reducer and integrated valve for connecting the Mobile Gas Flare M to gas pipes.
- Integrated pressure reducer for restricting the inlet pressure at the mobile gas flare (max. 1bar)
- Integrated shut-off valve for safe gas inlet and flow restriction
- Series 21 coupling and screw coupling for connecting a pressure or concentration measuring device
- 1" ET on the inlet side, Camlock coupling DN25 on the outlet side
- max. pressure 16 barAdapter S5020N-T5010K-T5010K with ball valve
new
Optional additional part to the Test head HEINZ for 
carrying out water pressure tests according to W400-2.
The pressure hose of the pump and an EDS2-V can be 
connected to the HEINZ at the same time via the T-piece.
Connections:
T-piece With nipple Series 5020 (Series 5000) and 
2x coupling Series T 5010 with ball valve (Series 5000)Adapter C25C to 1 inch with O-ring seal
new
Adapter for the Mobile Gas Flare M for use in hard-to-reach blow-out units. 
Connections: inlet side 1" ET with O-ring, outlet side Сamloсk coupling DN25 Gas hose DN25 with Сamloсk nipple can be connected directly.
Max. pressure 16 bar
Adapter DN claw coupling to S5020N
new
Claw coupling with connecting nipple series 5020T-connector C25N-C25C-C25C
new
T-connector with camlock connections for parallel operation of two devices of Mobile Gas
Flare M
max. pressure 16 barAdapter ventilation with sound insulation
new
with nipple series 5020 can be used with test body HANSAdapter DN15C to 2x DN15C
new
Compressed air manifold DN15 with claw coupling and ball valve on the inlet side, 2 outlets with claw coupling on the outlet side for simultaneous pressurisation of pipelines, e.g. for tests according to FW 602.
Max. pressure: 16 barT-piece C25C/S20C/C25N
new
Optional adapter for using the v-measurement in the OLLI for the Mobile Gas Flare M.
The appropriate connecting hose for v-measurement with the OLLI (article 285076) is also
required.T-piece C15C/S20C/C15N
new
Optional adapter for using the v-measurement in the OLLI for the Mobile Gas Flare S.
The appropriate connecting hose for v-measurement with the OLLI (article 285076) is also required.Adapter S21C to S26C
new
Adapter from quick coupling Series 21 to compressed air coupling (nominal size 7.2) Series 26 
P. max 35 barAdapter S5020N to T2510C
new
Adapter for use of HEINZ accessories (nipple series 2500) with test head HANS (coupling series 5000)
Nipple Series 5020 to coupling Series T 2510Adapter 1620N to 1/4 IT made of stainless steel
Adapter nipple 1620 to 1/4 internal thread
Adapter for screwing onto coupling.
Other connections can be made via the 1/4 inch internal thread.
Material: stainless steel
max. operating pressure 630 barCoupling series T2510 internal thread G1/4
Pmax = 450barAdapter test coupling S21C to 1/8 inch
Adapter test coupling series 21 to 1/8 inch for measuring at the 1/8 inch connection of the controllerFlow reducer for DWZ/EDS2-V
- additional accessories for reducing volume flow
for small drainage volumes up to approx. 500 ml
- Geka couplingAdapter test coupling S21K to 1/8" inch angled
Adapter test coupling series 21 to 1/8" inch to measure at the 1/8" connection of the regulator. Version with rotatable angle for hard to reach connections.Adapter 1620C to 1/4 inch ET stainless steel
Adapter measuring coupling 1620 to 1/4 inch external thread
Material: stainless steel
max. operating pressure 630barAdapter 1620N to 1/4 inch IT
Adapter nipple 1620 to 1/4 inch internal thread
Material: Free machining steel
max. operating pressure 630 barBall valve for test plugs
Coupling and nipple series 17Coupling S 21 external thread 1/8"
Pmax = 35bar entries per page 
20
 1 - 20 / 201 