Products
Meter connection
one-pipe meterYes No
two-pipe meterYes No
entries per page
20
1 - 20 / 29
Test cap DN 25 to S21C
Adapter test cap DN 25 to coupling series 21 for single-pipe meter G4/G6
Counter test adapter DN 50
Counter test adapter DN 50
for single-pipe meters G4/G6
with plugs and connection couplings Series 21
- without further accessories -
Adapter 1 1/4 inch ET to S21C
Screw connector for 2-pipe gas meter G4/G6 DN 25
1 1/4 inch external thread with screw connector on coupling Series 21
Test cap DN 40 to S21C
Adapter test cap DN 40 to coupling series 21 for single-pipe meter G10/G16
Adapter 2 inch, ext. thread to coupling series 21
Adapter screw connection 2 inch, ext. thread for 2-pipe gas meter G10/G16 DN 40
- to coupling S 21
Counter test adapter DN 25 SET
Counter test adapter DN 25 SET for 1-pipe gasmeter G10/G16
Counter test adapter DN 40
Counter test adapter DN 50 for 1-pipe gas meter
G4/G6
with plugs and connection couplings series 21
- without further accessories -
Adapter 2 1/2 inch ET to S21C
Screw connector for two-pipe meter G25 DN 50
2 1/2 inch external thread on coupling Series 21
Adapter Screw Connector 7/8 inch external thread Typ NL
Adapter screw connector 7/8 inch external thread
Typ NL
for coupling series 21
Adapter 1 3/4 inch ET to S21C
Screw connector for 2-pipe gas meter G6/G10 DN 32
1 3/4 inch external thread with screw connector on coupling Series 21
Adapter 7/8 inch IT to S21C
Screw Connector Type NL
7/8 inch internal thread to coupling Series 21
Adaptor extension 11/4 inch ET to coupling series 20 and 21
Adaptor extension 11/4 inch for 2-pipe gas metres G4/G6 DN25
with coupling S20 and S21 outside thread 11/4 inch
Test cap DN 25 Type EWE to S21C
Adapter test cap DN 25 type EWE to coupling series 21 for 1-pipe meter G4/G6
Jentsstuk V3
Jentsstuk V3
Adapter for two-pipe meter with thread 7/8" outer thread
and connection coupling for gas pressure measurement
Counter test adapter DN 25 - Type EWE
Counter test adapter DN 25 - Type EWE for 1-pipe gasmeter G4/G6
Adapter 1 inch ET to S21C
Screw connector for 2-pipe gas meter G4 DN 20
1 inch external thread with screw connector on coupling Series 21
Adapter 1/2 inch ET to S21C
Screw Connector Type GVT
1/2 inch external thread to coupling Series 21
Adapter 1 1/2 inch ET to S21C
Screw connector for two-pipe meter
1 1/2 inch external thread with screw connector on coupling Series 21
Flange disc with 2x measuring coupling
Flange disc with 2x measuring coupling
outer diameter of the disc: 150 mm
diameter of hole circle: 125 mm
The disc is fastened using the four retaining screws on the meter connection.
Test cap DN 50 to S21C
Adapter test cap DN 50 to coupling series 21
for single-pipe meter G25
entries per page
20
1 - 20 / 29