Extension cable DWZ 4 metres - 402090

Menu-driven test procedures for pressure tests on water pipes according to rules and regulations of EN 805 (Europe): - Contraction procedure - Normal procedure

Electronic pressure test case for pressure tests with connection possibility of up to 5 external pressure or temperature sensors. - the test procedures are menu-guided and can be carried out with simple Data entry dialog - a freely programmable pressure test is included - optional test sequences for gas and water tightness tests e.g. according to DVGW, ÖVGW, EWE, Avacon, WEVG. - a subsequent addition of test sequences is possible easily - large, illuminated display, even in direct sunlight easy to read - Data entry and signature via touch display and foil keys - Stylus for the touch display included - Data memory for hundreds of measurements, depending on test sequence - Communication via Bluetooth for update, data transmission, printer - LTE / GPS module (optional) - robust case (IP 67) - Operating time approx. 200 hours, extension with power supply possible from outside Dimensions: 220 x 90 x 168 mm Weight: approx. 1450 g

Test pump MPP 28-25 Pressure range 0 - 25 bar - practice-oriented test pumps with electronic control unit for the simplified performance of compression tests pursuant to EN 805 (W 400-2 in Germany) - automatic pressure stabilisation for preset test pressure which can be programmed in steps of 0.1 bar into the control unit - high delivery capacity rate of 28 l/min enable the generation of the required test pressure in less than 10 minutes, as required by the contraction procedure technical data: - connection value: 230 V / 400 V 50 Hz - power consumption: 2.200 VA - protection type: IP 54 - max. test pressure 25 bar - test pressure: 0 to 25 bar in steps of 0.1 bar - safety: safety valve - delivery volume: 28 l/min - decompression: automatic / manual - GSM-remote monitoring: optional

Test pump MPP 68-25 Pressure range 0 - 25 bar - practice-oriented test pumps with electronic control unit for the simplified performance of compression tests pursuant to EN 805 (W 400-2 in Germany) - automatic pressure stabilisation for preset test pressure which can be programmed in steps of 0.1 bar into the control unit - high delivery capacity rate of 68 l/min enable the generation of the required test pressure in less than 10 minutes, as required by the contraction procedure technical data: - connection value: 400 V 50 Hz - power consumption: 4.000 VA - protection type: IP 54 - max. test pressure 25 bar - test pressure: 0 to 25 bar in steps of 0.1 bar - safety: safety valve - delivery volume: 68 l/min - decompression: automatic / manual - GSM-remote monitoring: optional

Test pump MPP 68-35 Pressure range 0 - 35 bar - practice-oriented test pumps with electronic control unit for the simplified performance of compression tests pursuant to EN 805 (W 400-2 in Germany) - automatic pressure stabilisation for preset test pressure which can be programmed in steps of 0.1 bar into the control unit - high delivery capacity rate of 68 l/min enable the generation of the required test pressure in less than 10 minutes, as required by the contraction procedure technical data: - connection value: 400 V 50 Hz - power consumption: 5.000 VA - protection type: IP 54 - max. test pressure 35 bar - test pressure: 0 to 35 bar in steps of 0.1 bar - safety: safety valve - delivery volume: 68 l/min - decompression: automatic / manual - GSM-remote monitoring: optional

Test pump MPP 11 Pressure range 0 - 25 bar full automatic testing pump for pressure build-up and pressure holding adjusted without pressure impulses technical data: - connection value: 230 V 50 Hz - power consumption: 1.850 VA - protection type: IP 54 - max. test pressure 25 bar - test pressure: 0 to 25 bar in steps of 0.1 bar - safety: safety valve - delivery volume: 11 l/min. Maximum output approx. 300 l until automatic switch off, limited by temperature. - decompression: manual - Geka connection for water connection - quick coupling for pressure-side connection