Menu
slider
Shopping cartDevice technologyDevice optionsSoftwareExternal sensorsTest trailerPumps & CompressorsPower generator/storageGas flaresGas venting pipesDisinfectionConnection accessoriesTest accessoriesCharging technologyTransport & StorageAccessoriesOperating instructions

Power generator/storage

entries per page
1 - 4 / 4
Mobile battery storage Instagrid ONE 2.1kWh
new
Mobile battery storage Instagrid ONE 2.1kWh
Mobile battery power distribution system with 2.1 kWh capacity and 3.6 kW continuous power output. Instagrid ONE was developed as a portable, compact power supply for construction sites. - Power as from a socket (230V) with up to 18000 watts - without noise or exhaust emissions - Suitable for example for operating welding equipment, demolition hammers or motor test pumps - Island mode (capacity increase by connecting several batteries in parallel with Instagrid LINK) available - Real-time monitoring of location, performance data via Instagrid app included as standard - Suitable for operating an Esders motor test pump MPP 30-30 or MPP 11 (and former product serie MPP 28) Instagrid ONE, Type F Capacity: 2.1 kWh Output voltage: 230 VAC/50Hz Nominal power: 3.6 kW Peak power: 18 kW Fast charging function: charging time 3 years Permissible ambient temperature: -20 °C to 60 °C Shipping information: The Instagrid One can be switched to a safe mode (lock position) for transport/storage. All sockets (inputs and outputs) are inactive in the lock position. Transportation is permitted (transportation regulation UN 3480 must be observed).
Instagrid Link
new
Instagrid Link
Expansion module for increasing the capacity of the mobile battery storage unit Instagrid ONE. This expansion module allows the total capacity to be increased to up to 6.3 kWh by connecting up to three Instagrid ONE units in parallel at an output voltage of 230 V. Additionally, an island mode is supported: Uninterrupted replacement of Instagrid ONE units during ongoing operation. This article includes only the expansion module. 1–3 Instagrid ONE units are required for operation. Weight: 4.5 kg IP rating: IP54 Protection class: Class II / double insulated Operating temperature: -15 °C to 40 °C Input socket: 3 x Neutrik powerCON TRUE1 TOP® Output socket (EU): 3 x CEE 7/3 16A Output socket (CH): 3 x T23s 16 A Output voltage: 230 V AC / 50 Hz Output current: 16 A Switching time: < 20 ms Residual current device: 3 x 1P+N RCD type A, 30 mA Circuit breaker: 1P B16
Electric generator EX 6000E 6KVA, 5,4KW
Electric generator EX 6000E 6KVA, 5,4KW
Electric generator EX 6000E 6KVA, 5,4KW Suitable for MPP 11, MPP 28 and MPP 30 engine Honda GX390 / petrol tank: 6,5 l consumption: 2,4 l/h 2x socket 230 V, 16 A splash water protected electric starter with battery tube frame automatic low oil cut weight 90 kg dimensions: 83 x 51 x 56 cm (L x W x H) incl. built-in trailer included: - fixing power generators with half clamps - exhaust hose with ground implementation - electrical connection - function test
Electric generator EX 13500 TE 12KVA,
Electric generator EX 13500 TE 12KVA,
Electric generator EX 13500 TE 12KVA, 16,5KW Suitable for MPP 11, MPP 28, MPP 30, MPP 68 and MPP 70 engine Honda GX630 / petrol tank: 20 l consumption: 5 l/h 1x socket 230 V, 20 A splash water protected 1x socket CEE 400 V, 14 A splash water protected electric starter with battery tube frame automatic low oil cut weight 149 kg dimensions: 102 x 55 x 60 cm (L x W x H) incl. installation into trailer included: - fixing power generators with half clamps - exhaust hose with ground implementation - electrical connection - function test The power generator is not intended for outdoor use within the European Community and is designed for indoor installation only.
entries per page
1 - 4 / 4
keyboard_arrow_up

Bonjour!