Gas venting pipes

With sampling valve. - Mounting for test piece G 2 1/2" with ball valve - Separate feed via Storz C for filling with shut-off via ball valve - With replacement O-ring Max. pressure: 50 bar

- connection for test head HEINZ 2 1/2" ext. thread with ball valve - separate coupling connection possibility - connection for grounding cable

With sampling valve. - Mounting for test piece G 2 1/2" with ball valve - Separate feed via Storz C for filling with shut-off via ball valve - With replacement O-ring Max. pressure: 50 bar

- with 3 hooks and 2 fixing clips to fasten the gas stand pipe

- with 2 1/2 internal thread/ext. thread for connection to the gas standpipe - compressed air claw coupling for the compressed air supply

Ignition module for gas standpipe - accessory not included

The diffuser for the blow-off/measuring pipe v 2" provides outstanding noise reduction. It was optimized for operation at extremely high temperatures. It can be installed onto the blow-off pipe's 2" thread.

- stainless steel diffuser, ø 160 mm - 1 ext. thread for connection to the gas standpipe

Standpipe, DN 50, 1x Storz C system separator with shut-off valve Standpipe DN 80 VA/MS 1x C Ms System separator suitable for drinking water

3x hook incl. rope and tension clamps

With sampling valve - Mounting for test piece G 2 1/2" with ball valve - Separate feed via Storz C for filling with shut-off via ball valve - A 50 cm long standpipe extension with standpipe base DN 50 (Baden-Württemberg system) can be screwed on via the flange connection. Max. pressure: 50 bar

Muffler for gas standpipe - with 1" ext. thread for screwing into the diffuser - maximum allowable device temperatur is 600°C

Blow-off pipe 1" for gas standpipe incl. holder ignition module for blow-off pipe 1" The blow-off pipe1" can be placed into the Gas standpipe for the transport.

with shut-off valve Standpipe DN 80 VA/MS 1xC Ms suitable for drinking water

Blow-off pipe 2" for gas standpipe incl. holder ignition module for blow-off pipe 2" Total length: 1 m

Blow-off/measuring pipe v 2" incl. holder ignition module for blow-off pipe 2" and two plugs Blow-off pipe with integrated pitot tube for flow speed measurement and monitoring in combination with GOLIATH. Connection to GOLIATH for speed and gas concentration measurements is realised by a hose-connecting set (separately available). The outlet end of the blow-off pipe has a 2" external thread on which the diffuser/muffler can be screwed down. Length: 1 m

Standpipe extension with integrated pitot tube for measuring and monitoring the flow velocity in connection with GOLIATH. Connection of GOLIATH via hose connection set for measuring the velocity and gas concentration. The standpipe extension is equipped with an adapter 2 1/2" internal thread at the outlet so that a blow-off pipe 2" can be mounted. A 1" blow-off pipe can also be mounted using a suitable reducer.

- safe component against flame flashback into the pipe or tank - IBExU 11 ATEX 2056 X, explosion group IIC, according to DIN EN ISO 16852 - connection via tank truck system, tank truck coupling male part on both sides Please follow the instructions in the separately enclosed operating manual!

Standpipe extender NL 2 1/2" IT - System GF d63 via female thread 2 1/2" screwable to standpipe - with spare O-ring

Venturi injector for flare injector for flare - With 2½ IW/AW threading on both sides for direct connection to the blow-off pipe - Compressed air claw connection for the compressed air supply - Locking cap for the claw coupling with ball valve for measuring the gas concentration