DruckTest 2000 / DruckTest 2000 EX differential pressure gauge - 271201

Variant:

Robust, precise digital pressure measuring device in an aluminium housing. Backlit graphic display with menu navigation for viewing minimum/maximum pressure, start/end pressure and pressure drop. Measuring range: - 0 to 200 mbar with a resolution of 0.1 mbar - 200 to 2,000 mbar with a resolution of 1 mbar Operating time > 100 hours in pressure measurement mode (without backlight and at 20°C) Dimensions: 165 x 58 x 34 mm Weight: approx. 450 g Explosion-proof measuring device: - marking: II 2G Ex ib IIB T3 Gb BVS 05 ATEX E 010 X - temperature range: -20°C <= TA <= +50°C

Quantity

Description of the DruckTest 2000 / 2000 EX — a digital pressure differential measuring device

The DruckTest 2000 / DruckTest 2000 EX enables fast and accurate pressure measurements, ease of use and a wide range of applications. As a differential pressure measuring system a positive or negative pressure relative to the atmospheric pressure can be measured. By connecting the two nipples, pressure differences can therefore be measured. The DruckTest 2000 offers numerous advantages through the display of minimum and maximum values, as well as measurement times and start- and end pressures in pressure tests. The following operating modes are selectable from the menu:

Pressure Test
Display of starting pressure, final pressure, measurement time and pressure drop, as well as minimally and maximum pressure value.

Regulator Test
Display of the outgoing pressure, closing pressure, safety pressure release valve response pressure and leak-proof completion, upper and lower deactivation of safety shut-off valve and leak-proof completion.

Load test according to TRGI
Menu-driven procedure with individual Adjusting of the measuring time to the requirements of the TRGI load testing.

Tightness test according to TRGI
Menu-driven procedure with individual Adjusting of the measuring time to the requirements of the TRGI tightness testing.

Settings
Custom configuration of the operating parameters such as the measuring unit, automatic switch off or the duty cycle of the backlight to the user‘s requirements.

Features

Rugged hand-held instruments with ergonomic aluminum housing
Wide range of applications in the gas and water installation
Load- and tightness tests according to TRGI
High contrast LCD display with backlight for an optimal presentation of all measured values
Easy replacement of batteries with innovative battery Management
Systematic evaluation of the measured data using Esders PC-1 software
Graphical printout on site on mobile printer
Simple operation with intuitive menu navigation Practical accessories for all applications

Technical data

Display	LCD graphic display with 128 x 64 pixels + special characters, with backlight
Power supply	4 pcs 1.5V Alkaline AA Batteries or EX NiMH battery pack
Operating time	with alkaline manganese batteries > 100 h at pressure measurement (without lighting) > 20 hours at Gas detection (without lighting)
Measuring range	0 to 10.000 ppm methane; resolution 1, 10, 50, 100 and 1.000 ppm 0 to 200 mbar (hPa) and 200 to 2000 mbar; resolution 0,1 mbar and 1 mbar
Measurement precision	± 0,5 % of end value at 200 mbar and 20 °C, ±0,5 % of end value at 2.000 mbar and 20 °C
Operating Temperature	-20 °C to +50 °C
Dimensions	149–165 x 58 x 34 mm
Weight	ca. 450 g with batteries
Test number	BVS 05 ATEX E 010 X
Identification code	II 2G Ex ib IIB T3 Gb