menu
Menu
Picture_GOLIATHPicture_GOLIATH_Einsatz_GDR2

GOLIATH

Navigation

Description

The GOLIATH is perfectly suited for use in troubleshooting service. In addition to the typical application of a reported odour of gas, a large proportion of uses are based on the statement ‘no gas present’. In such case, the fitter will have to determine the cause and has been informed about the pressure measurement in the gas installation. The GOLIATH is perfectly suited for this task as well, with its measurement range of 0 to 2,000 hPa (optional pressure sensor).

Measuring carbon monoxide concentrations in addition to monitoring flammable gases is a time-tested practice at many gas supply companies. For this reason, the ‘Building inspection’ application also indicates the CO concentration and triggers an alarm if it exceeds 10 ppm. This keeps the operator informed of potential problems with the exhaust gas routing.
Picture_GOLIATH_Einsatz_GDR
Picure_GOLIATH_Testgas

Features

  • Time-tested Esders operation concept.
  • Very quick initial break-in phase after being switching on or changing application.
  • Extremely short reaction times when measuring CH4 and CO2 in all concentrations.
  • Oxygen and up to 3 toxic gas sensors are available as an option.
  • Ethane analysis with automatic measurement result assessment can be integrated.
  • Optional pressure measuring up to 2,000 hPa.

Technical data

DisplayLCD graphic display 128 x 64 pixels, illuminable
Power supplyNiMH rechargeable battery pack
Operating temperature-10 °C to +40 °C
Operating timeVaries depending on application and illumination
Charging Charging cradle supplied by 12 Volt DC or 230 Volt AC,
Charging time approx. 3 hours
USB port (specified for 500 mA),
Charging time approx. 8 hours
Data StoreFlash memory 4 Mbyte for more than 1 Mio. measurement values
Protection typeIP54
Dimensions200 x 100 x 87 mm
Weightapprox. 1.250 g
Explosion protection ATEXBVS 09 ATEX E 079 X – Ex II 2G Ex ib d IIB T3/T4 Gb

Device variants

keyboard_arrow_up