Products
Accessories Other Special gear oil for MPP 28, 500 ml
Special gear oil for MPP 28, 500 ml – 402064
Special gear oil for MPP 28, 500 ml
Special gear oil for MPP 28 , 500 ml
MPP 28 requires 0,35 l
*According to §8 of the Waste Oil Ordinance, we are obliged to take back waste oil.
You can send back the respective container to our head office in Haselünne.
Prices for customers after registration
1
Article affiliation:
Test pump MPP 28-25
.jpg)
Test pump MPP 28-25 Pressure range 0 – 25 bar
– practice-oriented test pumps with electronic control unit
for the simplified performance of compression tests pursuant
to EN 805 (W 400-2 in Germany)
– automatic pressure stabilisation for preset test pressure which
can be programmed in steps of 0.1 bar into the control unit
– high delivery capacity rate of 28 l/min enable the generation
of the required test pressure in less than 10 minutes, as required
by the contraction procedure
technical data:
– connection value: 230 V / 400 V 50 Hz
– power consumption: 2.200 VA
– protection type: IP 54
– max. test pressure 25 bar
– test pressure: 0 to 25 bar in steps of 0.1 bar
– safety: safety valve
– delivery volume: 28 l/min
– decompression: automatic / manual
– GSM-remote monitoring: optional
Test pump MPP 68-25
.jpg)
Test pump MPP 68-25 Pressure range 0 – 25 bar
– practice-oriented test pumps with electronic control unit
for the simplified performance of compression tests pursuant
to EN 805 (W 400-2 in Germany)
– automatic pressure stabilisation for preset test pressure which
can be programmed in steps of 0.1 bar into the control unit
– high delivery capacity rate of 68 l/min enable the generation
of the required test pressure in less than 10 minutes, as required
by the contraction procedure
technical data:
– connection value: 400 V 50 Hz
– power consumption: 4.000 VA
– protection type: IP 54
– max. test pressure 25 bar
– test pressure: 0 to 25 bar in steps of 0.1 bar
– safety: safety valve
– delivery volume: 68 l/min
– decompression: automatic / manual
– GSM-remote monitoring: optional
Test pump MPP 68-35
.jpg)
Test pump MPP 68-35 Pressure range 0 – 35 bar
– practice-oriented test pumps with electronic control unit
for the simplified performance of compression tests pursuant
to EN 805 (W 400-2 in Germany)
– automatic pressure stabilisation for preset test pressure which
can be programmed in steps of 0.1 bar into the control unit
– high delivery capacity rate of 68 l/min enable the generation
of the required test pressure in less than 10 minutes, as required
by the contraction procedure
technical data:
– connection value: 400 V 50 Hz
– power consumption: 5.000 VA
– protection type: IP 54
– max. test pressure 35 bar
– test pressure: 0 to 35 bar in steps of 0.1 bar
– safety: safety valve
– delivery volume: 68 l/min
– decompression: automatic / manual
– GSM-remote monitoring: optional
Test pump MPP 11
.jpg)
Test pump MPP 11 Pressure range 0 – 25 bar
full automatic testing pump for pressure build-up and pressure holding adjusted
without pressure impulses
technical data:
– connection value: 230 V 50 Hz
– power consumption: 1.850 VA
– protection type: IP 54
– max. test pressure 25 bar
– test pressure: 0 to 25 bar in steps of 0.1 bar
– safety: safety valve
– delivery volume: 11 l/min. Maximum output approx. 300 l
until automatic switch off, limited by temperature.
– decompression: manual
– Geka connection for water connection
– quick coupling for pressure-side connection