Products
Test trailer Pressure Test Trailer
Pressure Test Trailer – 401011
Pressure test trailer
Pressure test trailer – braked –
Closed boxes trailers 2515 x 1300 x 1520 mm permissible total weight 1350 kg
Wing door with rear revolving rods
Interior design with:
– AC socket with distribution
– lighting with button
– connection for test pump (MPP)
– water tank with supply hose, connection for MPP and expiration
– separate water supply for the water tank and test pump
– drain for water tank and test pump
– connection for umbrella at wing door
– aluminium ramps for test pump
– table for paperwork or storage measuring instruments
Prices for customers after registration
1
Article affiliation:
Test pump MPP 28-25
Test pump MPP 28-25 Pressure range 0 – 25 bar
– practice-oriented test pumps with electronic control unit
for the simplified performance of compression tests pursuant
to EN 805 (W 400-2 in Germany)
– automatic pressure stabilisation for preset test pressure which
can be programmed in steps of 0.1 bar into the control unit
– high delivery capacity rate of 28 l/min enable the generation
of the required test pressure in less than 10 minutes, as required
by the contraction procedure
technical data:
– connection value: 230 V / 400 V 50 Hz
– power consumption: 2.200 VA
– protection type: IP 54
– max. test pressure 25 bar
– test pressure: 0 to 25 bar in steps of 0.1 bar
– safety: safety valve
– delivery volume: 28 l/min
– decompression: automatic / manual
– GSM-remote monitoring: optional
Test pump MPP 68-25
Test pump MPP 68-25 Pressure range 0 – 25 bar
– practice-oriented test pumps with electronic control unit
for the simplified performance of compression tests pursuant
to EN 805 (W 400-2 in Germany)
– automatic pressure stabilisation for preset test pressure which
can be programmed in steps of 0.1 bar into the control unit
– high delivery capacity rate of 68 l/min enable the generation
of the required test pressure in less than 10 minutes, as required
by the contraction procedure
technical data:
– connection value: 400 V 50 Hz
– power consumption: 4.000 VA
– protection type: IP 54
– max. test pressure 25 bar
– test pressure: 0 to 25 bar in steps of 0.1 bar
– safety: safety valve
– delivery volume: 68 l/min
– decompression: automatic / manual
– GSM-remote monitoring: optional
Test pump MPP 68-35
Test pump MPP 68-35 Pressure range 0 – 35 bar
– practice-oriented test pumps with electronic control unit
for the simplified performance of compression tests pursuant
to EN 805 (W 400-2 in Germany)
– automatic pressure stabilisation for preset test pressure which
can be programmed in steps of 0.1 bar into the control unit
– high delivery capacity rate of 68 l/min enable the generation
of the required test pressure in less than 10 minutes, as required
by the contraction procedure
technical data:
– connection value: 400 V 50 Hz
– power consumption: 5.000 VA
– protection type: IP 54
– max. test pressure 35 bar
– test pressure: 0 to 35 bar in steps of 0.1 bar
– safety: safety valve
– delivery volume: 68 l/min
– decompression: automatic / manual
– GSM-remote monitoring: optional
Test pump MPP 11
Test pump MPP 11 Pressure range 0 – 25 bar
full automatic testing pump for pressure build-up and pressure holding adjusted
without pressure impulses
technical data:
– connection value: 230 V 50 Hz
– power consumption: 1.850 VA
– protection type: IP 54
– max. test pressure 25 bar
– test pressure: 0 to 25 bar in steps of 0.1 bar
– safety: safety valve
– delivery volume: 11 l/min. Maximum output approx. 300 l
until automatic switch off, limited by temperature.
– decompression: manual
– Geka connection for water connection
– quick coupling for pressure-side connection
Description
All necessary connections are made through the hole in the base, thus enabling operation with the trailer locked. In conjunction with the optional GSM remote monitoring system for the MPP, unsupervised long-term operation is possible, including over night.
Features
- Use with the powered test pump installed in the rail system
- Internal distribution for water supply and drainage, as well as power supply and lighting
- Shelving and racks for hoses, cables and pressure test case
- Mounting rails and brackets for testing standpipe, filling standpipe, ramps, valve keys and protective screen
- Water container for buffering the required water
- Folding work table for measuring device or for documentation
- Lockable trailer with hole in the base for feeding through hoses to the outside (for long-term measurements)
