Device technology GOLIATH
GOLIATH – 201053
GOLIATH RN with Ethane analysis
GOLIATH RN with Ethane analysis methane and toxic gases Detect – Measure – Analyse Rugged, explosion proofed measurement instrument with internal membranpump and reachargeable NiMH-battery. operating time: depending on application and backlight Application in accordance with DVGW G 465-4: – Enclosed space testing – Above ground inspection – Building inspection – Bar hole testing – Purging gas purity – Ethane analysis measurement ranges: – methane ppm, Vol.% – carbon dioxide 0 – 5 Vol.% / 0 – 100 Vol.% CO2 – oxygen 0 – 25 Vol.% O2 (optional) – carbon monoxide 0 – 500 ppm CO (optional) dimensions: 200 x 100 x 87 mm weight: approx. 1250 g explosion proofed instrument: sign: II 2G Ex ib d IIB T3/T4 Gb BVS 09 ATEX E 079 X temperature range: -10°C <= Ta <= +40°C
Prices for customers after registration
Select the required device options for your device here.
The GOLIATH is perfectly suited for troubleshooting service. In addition to the typical application of a reported odour of gas, a large proportion of uses are based on the statement ‘no gas present’. In such cases, the fitter will have to determine the cause and has been informed about the pressure measurement in the gas installation. The GOLIATH is perfectly suited for this task as well, with its measurement range of 0 to 2,000 hPa (optional pressure sensor).
Measuring carbon monoxide concentrations in addition to monitoring flammable gases is a time-tested practice at many gas supply companies. For this reason, the ‘Building inspection’ application also indicates the CO concentration and triggers an alarm if it exceeds 10 ppm. This keeps the operator informed of potential problems with the exhaust gas routing.
- Time-tested Esders operation concept.
- Very quick initial break-in phase after being switching on or changing application.
- Extremely short reaction times when measuring CH4 and CO2 in all concentrations.
- Oxygen and up to 3 toxic gas sensors are available as an option.
- Ethane analysis with automatic measurement result assessment can be integrated.
- Optional pressure measuring up to 2,000 hPa.
Goliath Option v
For our gas stand pipe we now offer the possibility to measure the speed when gassing or emptying gas pipelines.
The gas test stand pipe is a proven tool in the field of gas supply, which is used for pressure testing, filling and commissioning of gas pipes. For the gassing of the pipe, the DVGW recommends filling the pipes at a speed of between 3 and 7 m/s in the pipe. We now offer a practical solution for this task. A measuring pipe is used, which is equipped with an internal pitot tube and is connected to the GOLIATH gas measuring device for evaluation.
The GOLIATH Option v is equipped with a differential pressure sensor to determine the static and dynamic pressure in the pitot tube. The user enters the diameter of the main pipe and its length in the menu. The display of the GOLIATH then shows the speed in the main pipe and the estimated time required for gassing and the elapsed filling time, as well as the gas concentration.
EVERYTHING FROM ONE SOURCE
|Display||LCD graphic display 128 x 64 pixels, illuminable|
|Power supply||NiMH rechargeable battery pack|
|Operating temperature||-10 °C to +40 °C|
|Operating time||Varies depending on application and illumination|
|Charging||Charging cradle supplied by 12 Volt DC or 230 Volt AC,|
Charging time approx. 3 hours
USB port (specified for 500 mA),
Charging time approx. 8 hours
|Data Store||Flash memory 4 Mbyte for more than 1 Mio. measurement values|
|Dimensions||200 x 100 x 87 mm|
|Weight||approx. 1.250 g|
|Explosion protection ATEX||BVS 09 ATEX E 079 X – Ex II 2G Ex ib d IIB T3/T4 Gb|