Products
Operating instructions Operating instructions MPP 11
Operating instructions MPP 11 - 407009
Operating instructions MPP 11 English
Environmental protection is important to us.
Therefore, we want to make a contribution in as many areas as possible.
This also includes printing our operating instructions.
We provide you with our operating instructions free of charge in our customer portal, available
at any time.
If you do need a printed version, that is of course possible.
We donate 100% of the income from the manuals to a non-profit organization
dedicated to protecting our environment.
On our website we inform you every year to which project or which organization we send our
donation to.
Article affiliation:
Test pump MPP 28-25
Test pump MPP 28-25 Pressure range 0 - 25 bar
- practice-oriented test pumps with electronic control unit
for the simplified performance of compression tests pursuant
to EN 805 (W 400-2 in Germany)
- automatic pressure stabilisation for preset test pressure which
can be programmed in steps of 0.1 bar into the control unit
- high delivery capacity rate of 28 l/min enable the generation
of the required test pressure in less than 10 minutes, as required
by the contraction procedure
technical data:
- connection value: 230 V / 400 V 50 Hz
- power consumption: 2.200 VA
- protection type: IP 54
- max. test pressure 25 bar
- test pressure: 0 to 25 bar in steps of 0.1 bar
- safety: safety valve
- delivery volume: 28 l/min
- decompression: automatic / manual
- GSM-remote monitoring: optional
Test pump MPP 68-25
Test pump MPP 68-25 Pressure range 0 - 25 bar
- practice-oriented test pumps with electronic control unit
for the simplified performance of compression tests pursuant
to EN 805 (W 400-2 in Germany)
- automatic pressure stabilisation for preset test pressure which
can be programmed in steps of 0.1 bar into the control unit
- high delivery capacity rate of 68 l/min enable the generation
of the required test pressure in less than 10 minutes, as required
by the contraction procedure
technical data:
- connection value: 400 V 50 Hz
- power consumption: 4.000 VA
- protection type: IP 54
- max. test pressure 25 bar
- test pressure: 0 to 25 bar in steps of 0.1 bar
- safety: safety valve
- delivery volume: 68 l/min
- decompression: automatic / manual
- GSM-remote monitoring: optional
Test pump MPP 68-35
Test pump MPP 68-35 Pressure range 0 - 35 bar
- practice-oriented test pumps with electronic control unit
for the simplified performance of compression tests pursuant
to EN 805 (W 400-2 in Germany)
- automatic pressure stabilisation for preset test pressure which
can be programmed in steps of 0.1 bar into the control unit
- high delivery capacity rate of 68 l/min enable the generation
of the required test pressure in less than 10 minutes, as required
by the contraction procedure
technical data:
- connection value: 400 V 50 Hz
- power consumption: 5.000 VA
- protection type: IP 54
- max. test pressure 35 bar
- test pressure: 0 to 35 bar in steps of 0.1 bar
- safety: safety valve
- delivery volume: 68 l/min
- decompression: automatic / manual
- GSM-remote monitoring: optional
Test pump MPP 11
Test pump MPP 11 Pressure range 0 - 25 bar
full automatic testing pump for pressure build-up and pressure holding adjusted
without pressure impulses
technical data:
- connection value: 230 V 50 Hz
- power consumption: 1.850 VA
- protection type: IP 54
- max. test pressure 25 bar
- test pressure: 0 to 25 bar in steps of 0.1 bar
- safety: safety valve
- delivery volume: 11 l/min. Maximum output approx. 300 l
until automatic switch off, limited by temperature.
- decompression: manual
- Geka connection for water connection
- quick coupling for pressure-side connection