Option: Geothermal probe testing EN 805 - 222636
Inspection of geothermal probes
Geothermal probes are a central element of geothermal systems and must remain permanently sealed throughout their entire service life. Even the smallest leaks can lead to efficiency losses, damage to the subsoil or environmental risks. The quality assurance requirements for new installations are correspondingly high.
Leak testing of geothermal probes serves to verify proper installation and is often a requirement for official approvals or technical regulations at state and municipal level. In practice, pressure testing methods are used for this purpose, in which the probe is pressure tested and monitored over a defined period of time.
It is not only crucial that the test is carried out professionally, but also that the measurement results are documented completely and comprehensibly.
Which pressure testing method is suitable and permitted for geothermal probes? Read the details in our blog – Leak testing of geothermal probes with the smart memo.
Option: Testing of geothermal probes in accordance with EN 805
This option assists users in carrying out pressure tests on geothermal probes in a structured manner and ensures that all relevant test steps are documented digitally in accordance with the standard.
During the test, pressure and time curves are continuously recorded and saved in the smart memo. With the appropriate accessories, the test can be carried out fully automatically. The measurement results are clearly presented and automatically compiled into a test report – eliminating the need for error-prone manual record-keeping.
The programmed test procedure is similar to the contraction method specified in EN 805 and therefore complies with the most common requirement in regulations that a leak test on geothermal probes should be carried out ‘in accordance with EN 805’.
As clearly defined, traceable and comparable adaptations of the EN 805 contraction method for geothermal probes are currently specified exclusively in the SIA 384/6 standard, details of the leak test in accordance with SIA 384/6 have been incorporated into the smart memo.
With the ‘Geothermal Probe Test EN 805’ option in smart memo, users are thus provided with a powerful tool for efficient, safe and traceable leak testing of geothermal probes.
Updates to the EN 805 standard and their implications for pressure testing can be found here.



