Standpipe hydrant foot 2″, stainless – 402015

Test pump MPP 28-25 Pressure range 0 – 25 bar – practice-oriented test pumps with electronic control unit for the simplified performance of compression tests pursuant to EN 805 (W 400-2 in Germany) – automatic pressure stabilisation for preset test pressure which can be programmed in steps of 0.1 bar into the control unit – high delivery capacity rate of 28 l/min enable the generation of the required test pressure in less than 10 minutes, as required by the contraction procedure technical data: – connection value: 230 V / 400 V 50 Hz – power consumption: 2.200 VA – protection type: IP 54 – max. test pressure 25 bar – test pressure: 0 to 25 bar in steps of 0.1 bar – safety: safety valve – delivery volume: 28 l/min – decompression: automatic / manual – GSM-remote monitoring: optional

Test pump MPP 68-25 Pressure range 0 – 25 bar – practice-oriented test pumps with electronic control unit for the simplified performance of compression tests pursuant to EN 805 (W 400-2 in Germany) – automatic pressure stabilisation for preset test pressure which can be programmed in steps of 0.1 bar into the control unit – high delivery capacity rate of 68 l/min enable the generation of the required test pressure in less than 10 minutes, as required by the contraction procedure technical data: – connection value: 400 V 50 Hz – power consumption: 4.000 VA – protection type: IP 54 – max. test pressure 25 bar – test pressure: 0 to 25 bar in steps of 0.1 bar – safety: safety valve – delivery volume: 68 l/min – decompression: automatic / manual – GSM-remote monitoring: optional

Test pump MPP 68-35 Pressure range 0 – 35 bar – practice-oriented test pumps with electronic control unit for the simplified performance of compression tests pursuant to EN 805 (W 400-2 in Germany) – automatic pressure stabilisation for preset test pressure which can be programmed in steps of 0.1 bar into the control unit – high delivery capacity rate of 68 l/min enable the generation of the required test pressure in less than 10 minutes, as required by the contraction procedure technical data: – connection value: 400 V 50 Hz – power consumption: 5.000 VA – protection type: IP 54 – max. test pressure 35 bar – test pressure: 0 to 35 bar in steps of 0.1 bar – safety: safety valve – delivery volume: 68 l/min – decompression: automatic / manual – GSM-remote monitoring: optional

Test pump MPP 11 Pressure range 0 – 25 bar full automatic testing pump for pressure build-up and pressure holding adjusted without pressure impulses technical data: – connection value: 230 V 50 Hz – power consumption: 1.850 VA – protection type: IP 54 – max. test pressure 25 bar – test pressure: 0 to 25 bar in steps of 0.1 bar – safety: safety valve – delivery volume: 11 l/min. Maximum output approx. 300 l until automatic switch off, limited by temperature. – decompression: manual – Geka connection for water connection – quick coupling for pressure-side connection