With Esders Connect, the measurement data will directly be sent from your device to your office via integrated LTE
– fast, paperless, digitally and DSGVO compliant. You have the option of specifying up to three e-mail addresses in order
to send the completed test reports to them. The recipients also receive the GPS data for the exact localisation of the
measurement. The administration is clear and can be accessed from anywhere at any time.
Esders Connect is browser-based, so no updates are required, and you always have the latest version available.
Click here for more information about Esders Connect.
Dimensions | B x H x T approx. 220 x 90 x 168 |
---|---|
Weight | approx. 1450 g |
Display | 240 x 160 Pixel, touch display and backlight |
Power supply | Lithium-Ionen 7,2 V 10.000 mAh |
Charging time | approx. 8 hours |
Charging | Power supply or car adapter, 12 V |
Operating time (without backlight, 20 °C, one sensor) | approx. 200 hours, every additional sensor -10 % |
Operating time (with backlight 20 °C, one sensor | approx. 100 h |
Operation and charging at the same time | yes |
Operating temperatur | -10 to +40 °C |
Storage temperature | -20 to +60 °C |
Data storage | > 2.000.000 measured values (several thousand measurements, depends on the measurement time) |
Protection type | IP 67 (when lid and protecting caps are closed) |
Number of connectable sensors EDS2 | up to 5 pieces |
max. cable length for sensors | all in all approx. 100 m |
Bluetooth | Interface for measurement data transfer, printer and updates/upgrades |
LTE (optional) |