Connecting hose
Serie 17check_box_outline_blankYescheck_box_outline_blankNo Serie 20check_box_outline_blankYescheck_box_outline_blankNo Serie 21check_box_outline_blankYescheck_box_outline_blankNo Serie 26check_box_outline_blankYescheck_box_outline_blankNo Serie 2500check_box_outline_blankYescheck_box_outline_blankNo Serie 5000check_box_outline_blankYescheck_box_outline_blankNo Storzcheck_box_outline_blankYescheck_box_outline_blankNo Kamlokcheck_box_outline_blankYescheck_box_outline_blankNo GEKAcheck_box_outline_blankYescheck_box_outline_blankNo Claw cloupingcheck_box_outline_blankYescheck_box_outline_blankNo check_box_outline_blank1/8 Zoll AGcheck_box_outline_blank3/4 Zoll AGcheck_box_outline_blank3/4 Zoll IGcheck_box_outline_blank8L
check_box_outline_blankYescheck_box_outline_blankNo check_box_outline_blankYescheck_box_outline_blankNo check_box_outline_blankYescheck_box_outline_blankNo gas hose, length 10 m for Mobile Gas Flare M
NBR, both sides Camlock Adapter. Coupling DN 25 on one side,
nipple DN 25 on the other, max. pressure 16 bar- drain hose for use with the test head HANS and EDS2-V
- nominal diameter DN16 for low pressure loss and optimal flow rate
- Geka coupling on one side, nipple S 5020 on the other sidegas hose, length 5 m for Mobile Gas Flare M
NBR, both sides Camlock Adapter. Coupling DN 25 on one side,
nipple DN 25 on the other, max. pressure 16 barPressure hose, gas resistant, length 3 m, NBR DN13,
one side nipple series 2520, other side claw coupling,
max. pressure 16 bar
For pressurising pipelines via test specimen HEINZPressure hose DN 20 x 10 meters for MPP 70-35
both. series 5020 plug nipple and protective capHose set for use of the v-measurement in the OLLI for the mobile gas flare S and M.
On the inlet side there is a single hose connection with S20 nipple, which is plugged into a suitable coupling in the connection area of the mobile gas flare. On the outlet side, there are two hoses with S20 couplings for concentration measurement (red hose, pressure reducer 50 mbar integrated) and for pressure measurement (black hose) in the OLLI.for MPP 30 and MPP 68
both-sided plug nipple 5020 and protection cap- for tightness and stress test
- with drain valve and two couplings S 20 for connection of hand pump
and pressure measurement instrument
- cross fitting for connection to coupling S 21
- max. pressure 2 barwith connection nipple series 21, ball valve for HESVGas hose DN 50, length 10 m
- electroconductive hose with R < 10 to the 6 Ohm
with Camlock coupling and Camlock nipple
- operating pressure 20 bar
- operating temperature: -30 °C bis +80 °C short-period 95 °C
- bend radius 408 mm
- NBRfor pressure testing on both sides of two-pipe meters.
The two paths can be blocked separately by ball valves.for serviceability & regulator test
with nipple to connect the pressure balloon for safety valve test to conduct a manual regulator test.
For serviceability test and automatic regulator test the nipple remains unused.gas hose, length 5 m for Mobile Gas Flare S
NBR, both sides Camlock Adapter. Coupling DN 15 on one side,
nipple DN 15 on the other, max. pressure 10 barGas hose DN 32, length 10 m
- electroconductive hose with R < 10 to the 6 Ohm
with Camlock coupling and Camlock nipple
- operating pressure 20 bar
- operating temperature: -30 °C bis +80 °C short-period 95 °C
- bend radius 256 mm
- NBRExhausting hose electroconductive
length: 10 m
with nipple S 21 and ball valve for the gas exhausting
highly flexible, inner diameter 8 mm with 3,5 mm wall thickness
flow rate ca. 2 m³/h at 20 - 30 mbarConnecting hose for Druktest max
spiral hose 6 m with 2 couplings, series 17 and series 21for MPP 11 an MPP 28
both-sided plug nipple 5020 and protection capred 4 mm,
length: 2 mIn- and output tube with gas bubble to pressure bumpless usability testingConnection hose Tygon 6,4 x 1,6mm
incl. T-piece and drain valve