menu
Menu
Picture_HUNTERPicture_HUNTER_Einsatz

Description

If systematic gas pipeline inspection is your business, Esders is currently offering two new professional tools to help improve performance and results. While some developers are forced to compromise with multi-purpose devices, the new HUNTER gas leak detector is optimized for just one application - hunting for gas leaks! And the advantages become clear as soon as it is used in practice. The sample gas guidance and sensor chamber have been developed using all our experience. And the interplay between the selected and moisture-compensated sensors has also resulted in unrivalled reaction times and stability of the measured values. Even the smallest gas leaks are safely detected and the gas detector receives reliable measurement values which are easy to evaluate.

Picture_HUNTER_EinsatzTS14
Picture_HUNTER_Einsatz

Documentation

As monitoring work is always documented and carried out digitally, the HUNTER gas leak detector can also be supplied with an optional Bluetooth module. Even with Bluetooth transmission activated, the device offers over 10 hours of operating time. The Bluetooth function can also be used reliably under difficult conditions over distances over 2m.
The accompanying PC software reads out the measured value, the pump performance and the battery status and shows this data in a small window on the PC. Alarm thresholds can also be specified and controlled for a „PC alarm“. But the HUNTER can also document the measured values independently of the parallel transmission of the measured data. The maximum gas concentration is stored in a specified interval and can be evaluated using the PC1 software. The memory offers a capacity of over 250 operating hours with data storage every second.

Technical data

Display LCD graphic display 128 x 64 pixels, illuminable Display of measured value, maximum value and bar graph
Power supplyNiMH battery pack, 4,8 Volt, 3,8 Ah
Operating temperature -10 °C to +50 °C
Operating time (without backlight) > 10 hours incl. Bluetooth- transmission
> 11 hours without Bluetooth- transmission
Charging Charging cradle supplied by 12 Volt or 230 Volt
charging time approx. 5 hours
Data Store Flash memory 4 Mbyte for more than 1 Mio. measurement values
Documentation of the sensitivity tests
Protection category IP54
ADimensions 168 x 90 x 80 mm without couplings
Weight approx. 1.100 g, incl. battery pack
Measurement principle Semiconductor sensor
Measurement range 0 to 1.000 ppm CH4, Resolution: 1 ppm, 5 ppm
0,1 to 2,2 Vol.% CH4, Resolution: 0,1 Vol.%
Response time T90 ≤ 4 seconds for CH4 (Methane)
Pumping capacity > 40 l/h, >300 mbar

Device variants

keyboard_arrow_downHUNTER - gas leak detector

251001
HUNTER - gas leak detector
High sensitive professional gas detection instrument
for pipeline inspection and leak detection.
Selected sensors with humidity compensation and high sensitivity for methane.
Integrated powerful pump, rechargeable NiMH battery pack and
Bluetooth module for online data transfer to tablet computer.

operation time:
> 10 hours including Bluetooth-data transfer
> 11 hours without Bluetooth-data transfer
measurement range: 0 - 22.000 ppm methane
dimensions: 200 x 100 x 87 mm
weight: approx. 1100 g
temperature range: -10°C to +50°C
shopping_cartadd_shopping_cart

Accessories

keyboard_arrow_downCharging accessory:

202019
Charging station GOLIATH / HUNTER
Power supply or car adapter cable 12 V required.
Mehr erfahren...
shopping_cartadd_shopping_cart
202020
Charging station GOLIATH / HUNTER with communication interface
- USB cable included
Power supply or car adapter cable 12 V required.
Mehr erfahren...
shopping_cartadd_shopping_cart
202079
Charging station GOLIATH / HUNTER incl. mounting kit for fixing the device
securely in the charging station.
Power supply or car adapter cable 12 V required.


Mehr erfahren...
shopping_cartadd_shopping_cart
202080
Charging station GOLIATH / HUNTER with communication interface
and mounting kit for fixing the device securely in the charging station.
USB cable included. Power supply or car adapter cable 12 V required.
Mehr erfahren...
shopping_cartadd_shopping_cart
202003
Car adapter cable 12 V
including cigarette lighter connector, length: 1,8 m
Mehr erfahren...
shopping_cartadd_shopping_cart

keyboard_arrow_downCarrying equipment:

202028
Carrying belt GOLIATH, HUNTER, GasTest delta3 and ELLI
length adjustable
Mehr erfahren...
shopping_cartadd_shopping_cart
202062
Carrying system light (S/M) for hip size 80 - 125 cm
Light carrying system for the professional gas leak detection.
Inlcuding mounting for charging station GOLIATH / HUNTER
or communication station Bluetooth and Tablet PC.
Zum Produkt
shopping_cartadd_shopping_cart
202061
Carrying system light (L/XL) for hip size 110 - 165 cm
Light carrying system for the professional gas leak detection.
Inlcuding mounting for charging station GOLIATH / HUNTER
or communication station Bluetooth and Tablet PC.
Zum Produkt
shopping_cartadd_shopping_cart
202067
Device Holder HUNTER for use in the professional gas leak detection
Mehr erfahren...
shopping_cartadd_shopping_cart
232148
Carrying system Pro for use in the professional gas leak detection
Professional backpack system for professional gas leakage detection.
Designed for the inclusion of the following components:
- Tablet PC
- GPS antenna holder
- Communications holder Bluetooth GOLIATH or Hunter
- Charging Station GOLIATH / HUNTER
- Drill hole or bell probe
- Waterbottle
- Document compartment
- Accessory compartment
Zum Produkt
shopping_cartadd_shopping_cart
202042
Carrying case with foam insert for GOLIATH / HUNTER and accessories
dimensions approx.: 465 x 355 x 110 mm
Mehr erfahren...
shopping_cartadd_shopping_cart
202027
Aluminum carrying case for GOLIATH / HUNTER
With foam insert for carbon probe set (pinhole and bell probe)
and accessories.
- charging inside case possible
Mehr erfahren...
shopping_cartadd_shopping_cart

keyboard_arrow_downProbes:

271131
Air concentration probe V3 with flexible quick connection probe V3
overall length: 1,75 meters
Mehr erfahren...
shopping_cartadd_shopping_cart
232086
Carbon bell probe T-bone handle
For surface measurement in a rough terrain.
Mehr erfahren...
shopping_cartadd_shopping_cart
232130
Carpet probe TS14 GOLIATH / HUNTER
without flexible joint unit
Carpet probe with optimized suction area,
high flexible hose with coupling and
telescopic handle.

The warranty of the carpet mat is 3 years.
Mehr erfahren...
shopping_cartadd_shopping_cart
232131
Carpet probe TS14 GOLIATH / HUNTER with
flexible joint unit
Carpet probe with optimized suction area,
high flexible hose with coupling and
telescopic handle.

The warranty of the carpet mat is 3 years.
Mehr erfahren...
shopping_cartadd_shopping_cart

keyboard_arrow_downDocumentation:

052071
Software basic licence Pi Note for one workplace
Esders Pipeline inspection Note PC software licence for
1 workstation. Software for the import of the recorded data
from the Pi Note Android App. The software enables easy
and low-cost documentation of work when carrying out
inspections on gas pipelines. Pi Note is a GPS datalogger
for Android terminal devices, that enables easy logging of
damage, defects and photos.
Continuous recording of gas concentrations is possible
via a Bluetooth data connection to the Esders
measurement instruments ELLI, GOLIATH and HUNTER.
- the basic licence includes one device licence
It is possible to handle the recoded data of only one
measurement device (serial number)
- if you would like to use additional measurement instruments
you have to buy additional licences
Zum Produkt
shopping_cartadd_shopping_cart

keyboard_arrow_downSoftware additional licence Pi Note

252002
Software module HUNTER PC1 V3 for MS Windows 7/8/10
- licence for 1 workstation
- can be used with 32 and 64 bit operation systems
- software for easy documentation of measurements
- data base for administration of all measurements
- grafical visualisation and print out of all measurements
Zum Produkt
shopping_cartadd_shopping_cart

keyboard_arrow_downTest equipment for propane

331011
Test set RealTest digital for 10 ppm
User interface on display.
10 ppm in ambient air to excluded influences by humidity
and low impurities. Pump for semi-automatic test gas mixture
and test gas output by test adapter on the probe system.
With a 1 liter test gas can (12 bar) about 100 tests can be reached.

Delivery included:
test set, test hose with test disc and operating instruction.

Power supply, pressure reducer and test gas can 1000 ppm CH4
must be ordered separately.
Mehr erfahren...
shopping_cartadd_shopping_cart
202003
Car adapter cable 12 V
including cigarette lighter connector, length: 1,8 m
Mehr erfahren...
shopping_cartadd_shopping_cart
331020
Test set PED Basic 35 l/h
Regulation unit for direct connection to test gas cans.
Mehr erfahren...
shopping_cartadd_shopping_cart

keyboard_arrow_downTest equipment for 10 ppm test

331022
Test set PED 10 ppm for GOLIATH, HUNTER
Regulation unit for direct connection to test gas cans.
Gas flow: 70 l/h
Mehr erfahren...
shopping_cartadd_shopping_cart

Spare parts

keyboard_arrow_downFilters:

271112
Filterset hydrophob, 10 pieces - 1µm for SIGI, SAFE EthanTest, GOLIATH, HUNTER
Mehr erfahren...
shopping_cartadd_shopping_cart
271111
Filterset, dust filter 8 x 15 mm, 25 pieces
for carbon probe set and flexible quick connection probe V3
Mehr erfahren...
shopping_cartadd_shopping_cart
202007
Filterset, dust filter d=23,5 mm, 25 pieces
for carbon probe set (pinhole probe) and carpet probe TS 14
Mehr erfahren...
shopping_cartadd_shopping_cart
202008
Filterset, dust filter d=23,5 mm, 50 pieces
for carbon probe set (pinhole probe) and carpet probe TS 14
Mehr erfahren...
shopping_cartadd_shopping_cart
505020
Hydrophobic filter, d=30 mm, 1 µm, yellow for carpet probe, pin hole probe, floating probe
Mehr erfahren...
shopping_cartadd_shopping_cart

keyboard_arrow_downSpare parts for instrument:

275042
Gas inlet screw - with nipple S 20 for SIGI EX, SAFE EthanTest, GOLIATH, HUNTER, HUNTER H2
Mehr erfahren...
shopping_cartadd_shopping_cart
keyboard_arrow_up shopping_cart 0