Carrying system gas leak detection – 202062
Article affiliation:
GOLIATH Allround without Ethane analysis
GOLIATH Allround with Ethane analysis
GOLIATH RN without Ethane analysis
GOLIATH RN with Ethane analysis
GOLIATH RB
GOLIATH LOK
HUNTER gas leak detector
Laser HUNTER Gas detection & Gas measurement device
HUNTER Gas detection & gas measurement device
Description
With our professional gas leak detection we offer a complete set for the systematic inspection of underground gas pipes. Alongside the measurement equipment and suitable accessories (e. g. probes, carrying systems, etc.) we also offer an appropriate outdoor PC and a GIS software. Connecting the measurement device to the PC in order to display the measurement readings goes without saying.
- Different Esders measurement devices can be used
- German DVGW G 465-4-compliant device technology
- Gas detection probes for all kinds of surface
- Above-ground gas detection with sensitivity in the ppm range
- Rugged tablet-PC for use in the filed
- Intuitive GIS software
- Display of measurement readings via tablet-PC
- Bluetooth interface for data transfer
- GPS positioning data with up to 50 cm accuracy, even in densely built areas
- SBAS, RTX, VRS as GPS correction data connections
- Carrying system for special customer needs
Pre-locating
The number of leaks in our pipeline network has decreased significantly over the last decades. As a result,
the requirements for measurement technology for the systematic inspection of gas pipe networks in Germany
have changed. This makes effective pre-location during systematic pipe network inspection all the more important.
Usually, the required jobs for the inspection of underground gas pipes can be separated into pre-location
and subsequent pinpointing of a leakage. We offer a combined procedure that eliminates the limiting factors.
In the course of pre-locating a quick gas analysis (ethane test) is often performed on site to make sure
that the detected gas is natural gas and not a biogas. Depending on the classification of a leakage a site
inspection of a building may be required for further examination, e. g. in case of a class A II leakage.
For all applications, we offer the right measurement device in order to eliminate limiting factors.
For the pre-location of the networks we recommend our specialised device
HUNTER
, which is designed for this task. With the highest sensitivity, long operating time,
appropriate weight and Bluetooth for easy coupling with the tablet, it meets all the demands of today.
As a top class measurement device we recently launched the
Laser HUNTER,
a highly sensitive and selective gas detection
device with innovative laser technology. Cross sensitivity to humidity or exhaust gas can be excluded. Moreover,
the Laser HUNTER enables a quick and convenient gas analysis (ethane test) in almost real-time if needed.
Pinpointing
For pinpointing, the combination with our explosion-protected gas warning and gas measuring device
OLLI
is the best choice due to the changed situation. The OLLI can be used both as a warning device when entering cavities or structures and for
measuring methane up to 100 vol.% by infrared. The IR sensor also fulfils the requirements for CO2 measurement according to G 465-4. Due to its
low weight of approx. 400 g, it can easily be kept on hand at all times.
The universal device, a combination of the capabilities of the OLLI and HUNTER, is our explosion-proof gas measuring device
GOLIATH.
In many gas supply companies, it has proved its worth not only for monitoring the room air for combustible gases, but also for detecting carbon monoxide concentrations.
More information on modern gas leak detection according to German DVGW worksheet G 465-1 and
DVGW worksheet G 465-4 can be found in our blog.
Downloads
